Leathers

Club

LEATHER CATEGORY C

TECHNICAL CHARACTERISTICS

Thickness 1,4 – 1,6 mm
Leather types Corrected grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Pigmented


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 1.000 cycles – ≥ 4 grey scale
Wet rub fastness UNI EN ISO 11640:2000 250 cycles – ≥ 4 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 80 cycles – ≥ 4 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 6 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Adhesion of finish – Dry UNI EN ISO 11644:2009 ≥ 2 N/10 mm
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flex resistance UNI EN ISO 5402-1:2012 50.000 cycles – No cracksn
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

 

Cleaning and maintenance

Avoid placing leather near direct sun

Spots can be washed off using a lightly damp cloth with mild soap

Keep the leather away from heat sources

Dry immediately after the treatment

Dust regularly with a soft and dry cloth

Do not rub. Use a circular motion working toward the centre of the stain

Piuma

LEATHER CATEGORY E

TECHNICAL CHARACTERISTICS

Thickness 1,4 – 1,6 mm
Leather types Full grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Pigmented


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 1.000 cycles – ≥ 4 grey scale
Wet rub fastness UNI EN ISO 11640:2000 250 cycles – ≥ 4 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 80 cycles – ≥ 4 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 6 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Adhesion of finish – Dry UNI EN ISO 11644:2009 ≥ 2 N/10 mm
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flex resistance UNI EN ISO 5402-1:2012 50.000 cycles – No cracks
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

 

Cleaning and maintenance

Avoid placing leather near direct sun

Spots can be washed off using a lightly damp cloth with mild soap

Keep the leather away from heat sources

Dry immediately after the treatment

Dust regularly with a soft and dry cloth

Do not rub. Use a circular motion working toward the centre of the stain

Pampas

LEATHER CATEGORY E

TECHNICAL CHARACTERISTICS

Thickness 1,8 – 2,0 mm
Leather types Corrected grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Pigmented


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 500 cycles – 4/5 grey scale
Wet rub fastness UNI EN ISO 11640:2000 150 cycles – 4/5 grey scale

Cleaning and maintenance

Avoid placing leather near direct sun

Spots can be washed off using a lightly damp cloth with mild soap

Keep the leather away from heat sources

Dry immediately after the treatment

Dust regularly with a soft and dry cloth

Do not rub. Use a circular motion working toward the centre of the stain

Zero Impact

LEATHER CATEGORY F

TECHNICAL CHARACTERISTICS

Thickness 1,9 – 2,1 mm
Leather types Full Grain
Raw material European raw hides
Tannage Chrome-Free and Metal-Free
Dyeing Through dyeing aniline
Finishing Semi-Aniline


color fastness

Property Test Method Performance
Dry rub fastness UNI EN ISO 11640 500 cycles / ≥ 4 Grey Scale
Wet rub fastness UNI EN ISO 11640 50 cycles / ≥ 3/4 Grey Scale
Colour fastness to perspiration UNI EN ISO 15700 ≥3 Grey Scale
Fastness to light UNI EN ISO 105-B02 ≥ 3 Blue Scale


physical characteristics

Property Test Method Performance
Tear strenght EN ISO 3377-1 > 20 N
Adhesion of finishing – dry EN ISO 11644 ≥ 2 N/10 mm
Flex resistance – dry EN ISO 5402-1 50.000 cycles – No cracks
Fire behavior – Cigarette EN 1021-1 Pass
Fire behavior – Match EN 1021-2 Pass


CHEMICAL TEST

Property Test Method Performance
pH EN ISO 4045 ≥ 3,5 (Δ pH ≤ 0,7)
Metals: Chrome, Aluminum, Titanium, Zirconium, Iron UNI EN ISO 17072-2 ≤ 1000 mg/Kg

Cleaning and maintenance

Avoid placing leather near direct sun

Spots can be washed off using a lightly damp cloth with mild soap

Keep the leather away from heat sources

Dry immediately after the treatment

Dust regularly with a soft and dry cloth

Do not rub. Use a circular motion working toward the centre of the stain

Burt

LEATHER CATEGORY F

TECHNICAL CHARACTERISTICS

Thickness 1,3 – 1,5 mm
Leather types Full grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Aniline


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 50 cycles – ≥ 3 grey scale
Wet rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 3 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

 

Cleaning and maintenance

Avoid placing leather near direct sun

Keep the leather away from heat sources

Dust regularly with a soft and dry cloth

Danka

LEATHER CATEGORY F

TECHNICAL CHARACTERISTICS

Thickness 1,9 – 2,1 mm
Leather types Full grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Pigmented


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 1.000 cycles – ≥ 4 grey scale
Wet rub fastness UNI EN ISO 11640:2000 250 cycles – ≥ 4 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 80 cycles – ≥ 4 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 6 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Adhesion of finish – Dry UNI EN ISO 11644:2009 ≥ 2 N/10 mm
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flex resistance UNI EN ISO 5402-1:2012 50.000 cycles – No cracks
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

 

Cleaning and maintenance

Avoid placing leather near direct sun

Spots can be washed off using a lightly damp cloth with mild soap

Keep the leather away from heat sources

Dry immediately after the treatment

Dust regularly with a soft and dry cloth

Do not rub. Use a circular motion working toward the centre of the stain

Nabuk

LEATHER CATEGORY H

TECHNICAL CHARACTERISTICS

Thickness 1,8 – 2,0 mm
Leather types Nabuk
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 50 cycles – ≥ 3 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 3 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

Cleaning and maintenance

Avoid placing leather near direct sun

Keep the leather away from heat sources

Dust regularly with a soft and dry cloth

Vintage

LEATHER CATEGORY H

TECHNICAL CHARACTERISTICS

Thickness 1,1 – 1,3 mm
Leather types Full grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Aniline


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 50 cycles – ≥ 3 grey scale
Wet rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 3 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

Cleaning and maintenance

Avoid placing leather near direct sun

Keep the leather away from heat sources

Dust regularly with a soft and dry cloth

Deluxe

LEATHER CATEGORY J

TECHNICAL CHARACTERISTICS

Thickness 3.0 – 3.5 mm
Leather types Full grain
Raw material European raw hides
Tannage Chromium salt
Dyeing Through dyeing aniline
Finishing Aniline


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Dry rub fastness UNI EN ISO 11640:2000 50 cycles – ≥ 3 grey scale
Wet rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Alkaline solution rub fastness UNI EN ISO 11640:2000 20 cycles – ≥ 3 grey scale
Fastness to light UNI EN ISO 105-B02:2004 ≥ 3 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Tear strenght UNI EN ISO 3377-1:2012 ≥ 20 N
Flammability – Match test UNI EN 1021-2:2006 No ignition
Flammability – Cigarette test UNI EN 1021-1:2006 No ignition

 

Cleaning and maintenance

Avoid placing leather near direct sun

Keep the leather away from heat sources

Dust regularly with a soft and dry cloth

Pony

LEATHER CATEGORY J

TECHNICAL CHARACTERISTICS

Thickness 1,8 – 2,0 mm
Leather types Hairy cowhides
Raw material European raw hides
Tannage Chromium salt
Dyeing Aniline


COLOUR FASTNESS CHARACTERISTICS

Property Test method Performance
Fastness to light UNI EN ISO 105-B02:2004 ≥ 3-4 blue scale


PHYSICAL CHARACTERISTICS

Property Test method Performance
Flammability – Match test BS 5852:1990 Отсутствие возгорания
Furniture. Assessment of the ignitability of upholstered furniture. UNI 91/75 Класс 1 IM

 

Cleaning and maintenance

Avoid placing leather near direct sun

Keep the leather away from heat sources

Dust regularly with a soft and dry cloth